Herringbone
4 ranges
No ranges match those choices.
Can’t see what you’re after? We can source almost any carpet or flooring range in Australia: tell us what you have in mind when you book your free measure and quote.
Herringbone we’ve laid



The Preston job
- The brief: two layouts in the same pale, natural tone: herringbone in the hallway to the front door, and wide planks through the open-plan living room and kitchen.
- The challenge: every block is laid at an angle, and the pattern has to stay straight and centred down the full length of the hall.
- The result: the herringbone runs evenly from wall to wall and finishes against the skirting on both sides. Read the Preston case study
Herringbone is one of the most exacting floors we lay: every block is glued down by hand and every edge of the room is cut on an angle. Book a free measure & quote and we’ll bring the samples to your home, look at the subfloor and plan the pattern with you.
Herringbone flooring prices
All prices include GST. Supply includes an allowance for offcuts. Installation is quoted at the free measure, because the pattern and the shape of each room decide how much cutting there is.
| Herringbone and parquetry, supply only | Per m² |
|---|---|
| Engineered European oak herringbone or parquetry (WildOak Arlo and Odo, Greenwoods Prestige) | from $89 |
| Engineered Australian species (Spotted Gum, Blackbutt) | about $130 |
| Raw oak parquetry, finished on site (Greenwoods Classic) | Quoted on request |
| Installation and extras | Price |
|---|---|
| Herringbone, chevron and parquetry installation (with timber we supply) | Quoted at the measure |
| Remove and refit skirting boards, so no scotia is needed | $20/m² of floor |
| Or scotia / quad beading | $10/m² of floor |
| Take up and dispose of old carpet | about $8/m² |
| Furniture moving | $8/m² |
| Herringbone stairs, floor preparation, removing tiles or timber, door trimming and trims | Quoted at the measure |
Herringbone is the same supply price as planks in the same oak; the difference is in the installation. Jobs under 20 m² have a $450 small-job charge, which matters if you’re doing a hallway on its own. Plank prices and worked examples are in the timber flooring price guide.
Where herringbone works
| Room | Herringbone? |
|---|---|
| Entries and hallways | The classic place for it. In our Preston job the hallway is herringbone and the living areas are wide planks in the same tone |
| Living and dining rooms | Yes. We plan where the pattern starts so it sits square to the main wall or window |
| Bedrooms | Yes, though many families still choose carpet for bedrooms |
| Kitchen and meals | Yes, if spills are wiped up promptly and there’s a mat at the sink. Hybrid is the tougher choice for a busy kitchen |
| Over underfloor heating | WildOak Arlo and Odo herringbone are listed for in-slab hydronic systems up to 27°C; Greenwoods doesn’t list Prestige or Classic for heating |
| Apartments | Yes, within the owners corporation’s rules on hard floors |
| Laundries and bathrooms | Not recommended: standing water can swell timber |
Herringbone, chevron and parquetry: the ranges we supply
Herringbone uses rectangular blocks with square-cut ends, laid in a zigzag so the end of each block meets the side of the next. Chevron blocks have angled ends, so they meet in a clean point. Parquetry is the name for any patterned block floor, including herringbone, chevron, block and panel patterns.
| Range | Block | Thickness / oak top layer | Finish | Fixing | Underfloor heating |
|---|---|---|---|---|---|
| WildOak Arlo Herringbone | 888 × 148mm | 14mm / 3mm | Prefinished, matte UV lacquer | Direct stick only | In-slab hydronic up to 27°C |
| WildOak Odo Herringbone | 850 × 150mm | 15mm / 3mm | Prefinished, matte UV lacquer | Direct stick only | In-slab hydronic up to 27°C |
| Greenwoods Prestige | 888 × 148mm | 15mm / 3mm | Prefinished, grade AB | Confirmed at the measure | Not listed |
| Greenwoods Classic | Block, chevron or panel; sizes confirmed at quote | Solid or engineered, confirmed at quote | Raw: sanded and coated on site after laying | Confirmed at the measure | Not listed |
Colours: Arlo 5, Odo 3 and Prestige 8; Classic comes in 3 patterns (block, chevron and panel). Slip ratings as listed: Arlo P4 wet and D1 dry, Odo P3 wet and D1 dry (AS 4586-2013). Warranties as listed by the makers: WildOak 20 years’ wear (domestic) plus lifetime structural; Greenwoods Prestige lifetime structural and 25 years residential (limited); Greenwoods Classic replacement of faulty materials. Conditions apply. Each range page links the manufacturer’s documents (technical data sheet, warranty, and fire and slip reports where published), and its See samples at home button adds that range to your measure and quote request.
Prefer long boards? See all timber flooring, or compare hybrid and engineered timber. You can also see a timber floor in a photo of your room before you book.
Specification details
| Range | Colours or patterns | Fixing and pack | Manufacturer’s documents |
|---|---|---|---|
| WildOak Arlo Herringbone European oak on a multi-ply core | Dove Grey, French Grey, Ivory, Magnolia, Onyx | Tongue and groove, direct stick only. 1.051 m² a pack (8 blocks, 9.4 kg) | Technical data sheet, warranty (PDF) |
| WildOak Odo Herringbone European oak on a multi-ply core | Chalet, Iconic, Invisible | Tongue and groove, direct stick only. 1.02 m² a pack (8 blocks, 10.4 kg) | Technical data sheet, warranty (PDF) |
| Greenwoods Prestige European oak, engineered parquetry, grade AB | Chester Grey, Clear Oak, Honey Oak, Mink, Pearl White, Roman Grey, Smoked Natural, Smoked White | Fixing confirmed at the measure; pack size with the quote | Warranty (PDF). The fire and slip reports on the range page were run on Greenwoods’ Signature range |
| Greenwoods Classic European oak, solid or engineered (confirmed at quote) | Block, chevron or panel patterns | Fixing confirmed at the measure; sizes with the quote | Ask us for the current warranty |
Finishes and details
- Prefinished or finished on site. WildOak Arlo and Odo herringbone come with an 8% matte UV lacquer applied in the factory, and Greenwoods Prestige is prefinished too, so the floor is ready once it’s laid and the adhesive has cured. Greenwoods Classic is raw oak: it’s sanded after laying, and the coating is chosen and applied on site.
- Herringbone and planks in the same colour. Odo Herringbone’s three colours (Chalet, Iconic and Invisible) are also made as WildOak Odo planks, and Arlo Herringbone’s Ivory and Magnolia as WildOak Arlo planks. So a herringbone hallway can run into planks in the same colour, the same idea as our Preston job.
- Which way the pattern runs. Straight and centred down a hallway, or square to the main wall or window in a living room. We set out the starting line with you at the measure.
- A clean edge at the walls. We remove and refit the skirting ($20/m² of floor), so there’s no scotia, or fix scotia or quad beading ($10/m²). We don’t paint, so your own painter touches up the skirting afterwards.
- Doorways and other floors. Where herringbone meets carpet, tiles or planks, a trim finishes the join. A new floor can sit higher than the old one, so some doors may need trimming. Both are quoted at the measure.
- Stairs. Herringbone stairs are quoted at the measure, once we’ve seen the staircase.
Preparing the floor and planning the pattern
- A flat, dry subfloor. Every maker sets a flatness tolerance, and a concrete slab should be tested for moisture before timber goes down. Grinding, filling and levelling are quoted at the measure, once we’ve seen the subfloor; levelling compound needs time to cure.
- Glued down. WildOak herringbone is direct stick only: each block is glued to the subfloor rather than floated, so the subfloor has to be right.
- Setting out the pattern. Herringbone is laid from a starting line, so at the measure we work out where the pattern starts and which way it runs: usually straight and centred down a hallway, or square to the main wall or window in a living room.
- Edges, doorways and other floors. We plan how the pattern finishes at the skirting and at doorways, and where it meets carpet, tiles or planks, so the trims are in the right place.
- Raw oak is finished on site. Greenwoods Classic is sanded and coated after it’s laid, so the room stays clear for longer than with a prefinished floor.
- Before we start. Paint first, so your painter only has to touch up the skirting after we refit it. With glued blocks, the adhesive needs time to cure before heavy furniture goes back.
Taking up the old floor
We take up and dispose of old carpet and underlay for about $8/m². Removing tiles, timber or vinyl is quoted at the measure, because it depends on how the old floor is fixed and what’s underneath. Moving furniture is $8/m².
What herringbone installation includes, and what changes the price
- The old floor comes up, if removal is in your quote.
- The floor is prepared as quoted: grinding, filling and levelling.
- The skirting comes off, unless you’ve chosen scotia.
- The pattern is set out from the starting line, and the blocks are glued down one by one and cut at every edge.
- The skirting is refitted, or scotia is fixed, and trims go in at the doorways. Raw oak is then sanded and coated.
What changes the price: the pattern (herringbone, chevron or a parquetry panel); the shape of the room, because rooms with more edges, corners and doorways take longer to lay; the subfloor and how much preparation it needs; prefinished blocks or raw oak finished on site; and extras such as skirting or scotia, stairs, removal of the old floor and furniture moving.
What your written quote lists
| Line on your quote | What it covers |
|---|---|
| Herringbone blocks | Your range and colour, for the floor area plus the extra blocks that the angled cuts at every edge use up |
| Installation and adhesive | Setting out the starting line, gluing each block and cutting every edge |
| Floor preparation | What the subfloor needs, as seen at the measure: grinding, filling or levelling |
| Taking up the old floor | Removal and disposal, if you want it: carpet and underlay about $8/m²; tiles, timber or vinyl as quoted |
| Edges | Skirting removed and refitted ($20/m² of floor), or scotia ($10/m²) |
| Trims and doors | Trims at doorways and where the floor meets another, and any door trimming |
| Finishing (raw oak only) | Sanding and coating Greenwoods Classic on site |
| Stairs and furniture | Herringbone stairs, if you have them, and furniture moving ($8/m²) |
All prices include GST, and jobs under 20 m² have a $450 small-job charge.
Your written quote is emailed within 24 hours of the measure and lists each item separately, so you can compare it line by line (see comparing flooring quotes). Supply and installation normally takes one to two weeks from when you accept your quote and make payment, and herringbone takes longer to lay than planks, so we give you a realistic timeframe at the measure. Our installation is guaranteed for 24 months under our workmanship warranty. We supply and install: we don’t lay flooring bought elsewhere.
Larger herringbone projects
For builders, designers and owners doing several rooms or a whole floor:
- Send your plans. Attach floor plans or a finishes schedule to your enquiry (the form takes PDFs and photos). We confirm the measurements on site at the free measure, and the written quote follows within 24 hours.
- Documents for the specification. The technical data sheets and warranties are linked above and on each range page. Need another test report for a builder or owners corporation? Ask us.
- Samples on site. Our mobile showroom brings the herringbone samples to your site with the measure, or see them at our Huntingdale showroom by appointment.
- Timing around other trades. Herringbone takes longer to lay than planks, and glued blocks need time for the adhesive to cure, so we agree the installation dates at the measure. Supply and installation normally takes one to two weeks from when you accept your quote and make payment; if your range takes longer to arrive, we tell you when we quote. Commercial jobs can be installed after hours or at weekends.
- Supply only. Builders can order herringbone supply only, at the prices above. See wholesale and supply-only orders for builders.
Book a free measure & quote and attach your plans.
Frequently asked questions
How much does herringbone flooring cost in Melbourne?
Engineered oak herringbone starts from $89/m² supply only, including GST, the same as oak planks. Engineered Australian species are about $130/m². Installation is quoted at the free measure, because the pattern and the shape of the room decide how much cutting there is.
Why does herringbone cost more to install than planks?
Each block is glued down by hand from a starting line, and every edge of the room needs angled cuts, so it takes longer than laying long planks.
Herringbone, chevron or parquetry: what is the difference?
Herringbone blocks have square-cut ends and meet end to side in a zigzag. Chevron blocks have angled ends that meet in a point. Parquetry covers any patterned block floor, including herringbone, chevron, block and panel patterns. Greenwoods Classic comes in block, chevron or panel patterns.
Can herringbone go over underfloor heating?
WildOak Arlo and Odo herringbone are listed by the manufacturer as suitable for in-slab hydronic heating up to 27°C. Greenwoods doesn’t list Prestige or Classic for underfloor heating, so ask us before you plan it.
Is herringbone floated or glued?
WildOak herringbone is direct stick only, so it’s glued to the subfloor. For the other ranges we confirm the method at the measure, once we’ve seen the subfloor.
Can you quote from plans for a renovation or new build?
Yes. Attach your floor plans or finishes schedule to your enquiry (the form takes PDFs and photos). We confirm the measurements on site at the free measure, and your written quote follows within 24 hours.
Do you paint the skirting after the floor goes down?
No. We remove and refit the skirting, or fix scotia, and your own painter touches it up afterwards. If you’re painting, do it before we start.
Can herringbone run into planks in the same colour?
Yes. WildOak Odo Herringbone’s colours Chalet, Iconic and Invisible are also made as Odo planks, and Arlo Herringbone’s Ivory and Magnolia as Arlo planks. In our Preston job the hallway is herringbone and the living areas are planks in the same tone.
Can I see herringbone samples before I choose?
Yes. Our mobile showroom brings samples to your home with the free measure, so you can see them in your own light, or you can visit our showroom in Huntingdale by private appointment.
Can you do herringbone on stairs?
Herringbone stairs are quoted on request, after we’ve seen the staircase.
How long does a herringbone floor take?
Supply and installation normally takes one to two weeks from when you accept your quote and make payment. Herringbone takes longer to lay than planks, and raw oak is finished on site, so we give you a realistic timeframe at the measure.
Which areas do you install in?
Melbourne’s inner, northern, eastern and south-eastern suburbs, from Port Melbourne, Essendon and Preston across to Monbulk, and down to Cranbourne South and Safety Beach. See the suburbs we cover.
See the samples in your own home
24-month workmanship warranty · Written quote within 24 hours of the measure · Installed in one to two weeks, normally · Samples at your home or our Huntingdale showroom



